For safety, legal, and operational reasons Unimed reserves the right, anytime to request additional documentation as/if needed, and with short notice, to decline any shipment of unacceptable goods, incl. Dangerous Goods.
Any extra cost, losses, or expenses (incl. fines, penalties, etc.) that might arise due to shipment of above-mentioned goods (Dangerous Goods and Unacceptable Goods) shall be for customer’s account.
For any questions to the above please contact us via e-mail at below address:
cm-lim@utdfeeder.comFind below guidelines for Dangerous Goods and the latest list of Unacceptable Goods.
Dangerous Goods (DG):
It is customer's responsibility to handle and declare DG documents correctly, according to the IMO IMDG Code. Shipments of DG cargo are subject to correct DG declaration, labeling, packing, stuffing, and documentation, and must be strictly in accordance with last amendment in force of the IMDG Code and the relevant requirement by competent authorities.
Please always provide the DG documents well in advance prior to loading on UFS feeder vessels.
We need forecast information 4-5 working days prior to loading and the DG documents (DG Manifest and DG Declaration incl. container number) latest with final Loading List.
Above information must be mailed to our relevant booking department via one of the below mail addresses, and must also be sent to the relevant agents in port of loading and port of discharging:
bookings@utdfeeder.com
In all ports of discharging it is required to notify hazardous cargo 24 up to 48 hours prior the arrival, where the DG documents must be submitted (e.g. DG Declaration, DG Manifest, valid Tank Certificates, etc.).
Unimed may always request additional documentation for final approval such as:
- DG Manifest,
- DG Declaration,
- Valid Tank Certificate,
- MSDS,
- Approvals from Port Authority, Fire Brigade, Port Security, Competent Authority,
- Shipper declarations,
- Weathering Certificate,
- Vanning certificate,
- Flashpoint of the commodities,
- Various statements.
Unacceptable Goods:
Unimed is not accepting the following products:
- Ammonium Bromate and its aqueous solutions and mixtures of bromate with an ammonium salt (SP350)
- Ammonium Chlorate and its aqueous solutions and mixtures of bromate with an ammonium salt (SP351)
- Ammonium Chlorite and its aqueous solutions and mixtures of bromate with an ammonium salt (SP352)
- Ammonium Permanganate and its aqueous solutions and mixtures of bromate with an ammonium salt (SP353)
- Ammonium Hypochlorite
- Ammonium Nitrate liable to self-heating sufficient to initiate a decomposition
- Ammonium Nitrites and mixtures of an inorganic nitrite with an ammonium salt
- Chloric Acid, Aqueous solution with a concentration exceeding 10%
- Ethyl Nitrite pure
- Fireworks
- Hydrocyanic Acid, Aqueous solution (Hydrogen cyanide, aqueous solution) with more than 20% acid, by mass
- Hydrogen Chloride, refrigerated liquid
- Hydrogen Cyanide, solution with more than 45% Hydrogen Cyanide
- Mercury Oxycyanide pure
- Methyl Nitrite
- Mixture of a Hypochlorite with an ammonium salt (SP349)
- Perchloric Acid with more than 72% acid, by mass
- Silver Picrate, dry or wetted with less than 30% water by mass
- Toxic waste materials
- Weapons of mass destruction
- Zinc Ammonium Nitrite (see IMDG Special Provision 900)
